|
|
||
|
Single 20mm stator mount with screws $7.95 |
 |
|
|
Get housings and fans HERE |
|
|
| Presenting our line of motor mounts to fit the EDF55 with the 300 series motor. These mounts are precision machined to fit the EDF housing and combined with the mounting screws give a very rigid base for your motor. The cooling holes allow airflow to the stator, cooling the windings so you can run more power. |
|
|
|
|
|
Double 22.7mm stator mount with screws $7.95 |
|
Shafts are designed long enough to fit
the
GBx Endbell &
flux ring (22.7 stator only) If you use a regular can the shaft will protrude 3 to 4mm out the back |
 |
| Shaft to fit SINGLE stator $1.95 | |
| Shaft to fit DOUBLE stator $1.95
|
