- Scrub inside of can with
scouring pad
- Clean with Alcohol
- Cut out magnet template
from HERE
|
 |
|
 |
|
- Use marker to accurately
mark can per template
- If you're like me you will
get better results with one of those magnifying
lamps
|
 |
|
 |
- All lines transferred to
bell
|
- Using a sharpened popsicle
stick or your favorite non ferrous tool
- Position the magnets along
the lines. I try for the center of my line with the
edge of the magnet
- Make sure they are flush
with the top
- Verify your polarity as
you're installing
- Hit it with your favorite
brand of CA
- Repeat
|
 |
